Products
Home > Products > CNC Router Spare parts > cnc router wireless DSP controller

cnc router wireless DSP controller

cnc router wireless DSP controller

GZ Ledio cnc router wireless  DSP controller
Full Function Wireless Handle for cnc router/engraving machine NC Studio compatible, so cnc router can control by Computer Or Wireless Handle. More fast and convenient.

Packing Parts:

1. One Wireless USB Receiver

2. One Wireless Handle

DC Description

Name

Voltage

Current

Note

WirelessUSB Receiver

45V—50V

Less than 50ma

Wireless Handle

15V—30V

Average Current

Less than 2ma

Use of time More than 2 months USE Two 2000MAH Battery

Note: Wireless Handle Need Two AA Battery

No.

Performance or Parameters Description

1

The RF is Standard with 2.4G ISM the Tx power is 0DB and the RX sensitivity is -98DB

2

The RF has 64 channelsthe channel gap is 1Mhz

3

The transmission distance is further than 15 meters with no barrier

4

The protocol Designed with high performance

5

To jump frequency Adaptively when noised which can work with 2.4G wireless Mic Wlan and Bluetooth etc. devices.

6

32 sets Wireless Handle work fine at the same time in one room with no-interference each other

operating steps Description:

Step 1

Set up the Driver Software ,and finished Set up

Step 2

OPEN The Driver Softwarethen Open The NcStudio Software

Step 3

Please Insert Wireless USB Receiver into USB Jack

Step 4

Installing 2 AA Batteries into Wireless HandlePress red Power switch

After Service Description

One year guarantee. Except following situation:

1. To disassemble the handle voluntarily, do not guarantee.

2. Artificial damage the products, do not guarantee.

 
 
 
 
Message inquires
Product name:
Content:
Name:
Tel:
E-mail: